Plugadget MINI PCI-E to USB3.0 Adapter Card Mini PCIE to 20Pin/19Pin Expansion Card Mini Pci-e to USB3.0 adapter
Compliant with the PCI-Express specification version 2.0. Compliant with USB3.0 SuperSpeed specification version 1.0. Compliant with the xHCI specification version 1.0.
The main control chip: Renesas uPD720202 chipset.
The maximum transmission rate is up to 5Gbps, which is much higher than USB2.0's 480Mb/s, up to 10 times. Backward compatible with USB2.0, USB1.1, USB1.0.
Transmission rate: 5000/480/12/1.5Mbps.
Built-in SATA enhanced power-on interface. Support USB hot plug function.
Support for Windows XP/2003/Vista/win7/win8/2003/MAC10.8 and above.
Adopt Master: Renesas uPD720202
Support interface: MINI PCI-E
Support system: for WinXP/Vista/Win7/Win8 32-bit/64-bit MAC10.8 or higher
Mini PCI-E because without a 5V power supply, not directly to the USB-powered, so it can be inserted using the SATA power cable to work properly!
This expansion card can only be plugged into the MINI PCI-E interface, can not be used MSATA interface. Please make sure when buying interface, or can not work.
USB3.0 is double total 20PIN, which has one foot already needle injection foolproof, so called 19PIN.
Please buyers in the purchase be sure to see the notes and instructions below to purchase! !
Because SATA Docking Station are plastic, not iron, so the line is relatively tight, when the harness must withstand plug the cable back transposons, forced plug wire when the transposon will tilt. Remember Remember!
With USB3.0 popularity, more and more chassis provides 20pin USB3.0 interface, there are many DIY enthusiasts to achieve self-install the front panel 20pin USB3.0 interface! MINI PCIE motherboard directly out 19PIN socket interface extensions, you can connect the front panel of the chassis, thus providing ultra-high-speed USB3.0 interface front, very convenient!
Driver Installation Instructions:
The accompanying CD into the CD-ROM into the NEC directory --D720201-2-- Double-click the .exe file inside the next step. When prompted, reboot the computer.
As previously installed driver, first in the Control Panel Add or Remove Programs --- - Renesas Electronics USB3.0 Host ControllerDriver uninstall and re-install
1 * Expansion Adapter Card
1 * Drive Disc